Questions
Our specialists answer on your questions. In order to receive answer on e-mail, please fill the appropriate field.
Raed Abed Mahdi 06.02.2012 08:09dear sir,
please are you have aluminum foam alloy 6101 T6 ,to used it in my project
thank you
Raed Abed Mahdi
Ph.D Student
MalaysiaGood day!
Thank you for your attention to our company. Yes, we produce aluminium foam, but we must know main technical characteristics of it (type, width, length, thickness, PPI and the quantity). The choice of the material largely depends on its application as well. If you will give us this information we can give you an advice for better choice. Our specialist will connect with you as soon as possible and sent you some information about our foam materials. Terry Dawkins 30.01.2012 03:44
Please advise…are you able to supply the following
Nickel Foam
Please quote price and availability on your minimum quantity to start (project
could grow) along with your best possible lead time.
I thank you for your help and await a quotation.
Kind Regards,
Terry DawkinsDear Terry!
Thanks a lot for your inquiry. Could you explain for what aim do you need Ni foam? And also we need to know PPI, density, size and thickness of samples? If you will give us this information we can give you an advice for better choice. What about price it strongly depends on quantity. Our specialist will connect with you as soon as possible and sent you some information about our foam materials. Woonsup Shin 23.12.2011 09:44
Dear Sir/Madam,
I could find your nickel foam through the internet. We want to use the foam for
electrolyzing water. May I have the following information?
- Pore size
- Thickness
- Minimum amount for order and Price
Best Regards,
Woonsup Shin, ProfessorDear Woonsup!
Thanks a lot for your request. We can offer you a big variety of Ni Foam with thickness from 0.5 to 30 mm and 5–120 PPI. We can also produce the size according to your requirement. Our specialist will connect with you as soon as possible and sent you some information about our foam materials. George Berov 30.11.2011 04:42
Hi,
I'm interested in using copper foam in heat removal application for Solid
State Lighting fixtures.
Does your product come in sheets with thickness in the range from 30mm to 60mm?
Best Regards
George BerovDear George!
The max thickness of Cu Foam we produce is 30 mm. If you need more thickness you can get it by adding a few sheets. Dr. George Avgouropoulos 27.10.2011 04:52
Dear Sir/Madam,
Hello from Greece. My name is George Avgouropoulos.
I ‘d like to know a few details concerning your copper metal foam, since I am
interested in buying it as catalyst support.
For example could you please send me the corresponding prices for copper metal
foam plates with the following characteristics:
1.Plate thickness: (a) 3 mm, (b) 5 mm (if these dimensions are not applicable,
which are the closest customized dimensions?)
2.Dimensions> 100x100 cm2
3.Porosity 30 ppi
Please send me details about:
the minimum quantity purchasable
the unit cost
delivery costs
delivery time and modality
order and payment modalities
With kind regards,
Dr. George AvgouropoulosDear George!
Thanks a lot for your inquiry. Yes, we produce Copper Foam you need. Our specialist will connect with you as soon as possible and sent you some information about our foam materials. James 30.09.2011 04:08
Hi! Could you produce round-shaped Ni Foam?Dear James!
Yes, we can produce round-shaped Ni Foam, because Ni Foam plates cut very easily. Fuat Gocek 02.08.2011 12:15
Hi,
I need invar or nilo NiFe alloy foam.(36% Ni +Fe)
What PPI and thickness sheets are available as invar alloy?
thanksDear Fuat!
We have ferro-nickel foam (36% Ni + Fe) with following characteristics:
thickness: 10 mm,
maximum size: 450x450 mm,
ppi: 30.
The choice of the material largely depends on its application. Our specialist will connect with you as soon as possible and sent you some information about our foam materials. ugo abundo director of physics laboratory 12.07.2011 21:32
Dear Sirs,
I'm professor Ugo Abundo, director of physics laboratory at Secondary Polytechnic School "L.Pirelli" in Rome (Italy).
In some planned laboratory experiences, in a network Project according to wich more schools will follow, we need small amounts of specimens as detailed in the following.
Please, detail for each one:
the minimum quantity purchasable
the unit cost
delivery costs
delivery time and modality
order and payment modalities
Details of specimens:
Nickel porous plate (metal-foam) diameter 20mm, thickness 5mm;
Nickel porous cube (metal-foam) dimension 10mmx10mmx10mm;
Nickel porous cylinder (metal-foam) diameter 10mm, height 20mm.
Questions: (are such customized dimensions possible?)
We are grateful for a kindly quick answer.
Sincerely yours.
Prof. Ugo Abundo – "L. Pirelli" School laboratory – Rome (Italy)
Mail to: interprogetto@email.itDear Ugo!
Thanks a lot for your inquiry. The samples can be cut with scissors very easily. You can put some specimens together in order to get necessary thickness. Our specialist will connect with you as soon as possible and sent you some information about our foam materials. Rafael 28.06.2011 09:33
Hello!
May I have the quotation for the items shown as below:
1. Cu foam (1mm and 1.5mm in thickness), 99%, 99.9% and 99.99% impurity
2. Ni foam (1mm and 1.5 mm in thickness), 99%, 99.9% and 99.99% impurity,
area density around 320g/m2 is preferredGood day!
We have Ni foam and Cu foam from 1,6 mm to 3,0 mm (1,6 mm, 2,5 mm, 3,0 mm) – it is thin metal foam. This metal foam with density – 320-420 g/m2, impurity 99,9 %. You can appeal to our sales managers for more detailed information. Roger 24.05.2011 08:48
The boiler room works on barks. The main emission is CO (8500 mg/m3). The flow
is 3000 m3/h. Can we use catalysis in this case?Good day!
Yes, the catalyst produced by ECAT is suitable for this emission and flow. For more detailed information you can appeal to our sales managers. Kris 02.05.2011 17:47
Hello!
Do you realize benzpyrene cleaning?Good day!
Our Catalytic Neutralization of Gas Emissions is suitable for benzpyrene cleaning. The series of benzpyrene neutralization tests have been spent in February, 2011. The reached efficiency of 3,4 benzpyrene neutralization is 98,7%. Tom Werner 30.03.2011 03:51
Hello!
What is the durability of your catalysts?Good Day!
It depends of a lot of factors like kinds of catalysts, applications, service conditions, concentrations, etc. The operation life up to 12 000 hours is guaranteed. Fusheng Ke 27.02.2011 16:07
Could you tell me more information about the nickel foam? such as thinckness,
density, average pore size. thank you.Dear Fusheng Ke,
We have two kinds of Nickel Foam - Continuous Nickel Foam (thickness 1,6-2,5 mm; density 320-450 g/m2; PPI 80-110) and Thick Nickel Foam (thickness 5-20 mm; density 0,3 - 0,7 g/m3; PPI 20-60). For more information you can contact following e-mail: sales@ecocatalysis.com Chris 26.01.2011 09:35
Due to our manufacture’s features dust-ignition-proof construction is very
important for us. Is it possible to apply it in your systems?Yes. It is possible at additional expense. What kind of dust-ignition-proof construction do you need? Fred 27.12.2010 03:59
Good day!
Our company produces plastic. The main emissions are: metanale and sterol. Are
your products (catalysts) suitable for these emissions?Our production can be used for clearing of these emissions. But we need to receive more detailed information for making desision(volume of emissions, structure of emissions, temperature etc.). We suggest you to fill the questionnaire for convenience. Jane 30.11.2010 05:54
Is it possible in your company to make an order of exhaust cleaning catalyst on diesel engines with urea injection - in powder form?Our company has designed exhaust gases cleaning systems with urea giving (in the liquid state). So we can give to you finished exhaust gases cleaning systems or simply supply the catalysts. George 26.09.2010 16:55
Do you have a gas emissions purification system for diesel generators? Ashley 02.08.2010 21:20
Hello--I'm looking for a 12 inch long, 1/2 inch diameter cylinder of aluminum
oxide foam. Could you give me a price quote for that? Thanks. John 19.05.2010 06:41
Can I get more information about ozone decomposition catalyst?
